Materials Dealing with Power UNIT one
Common Description
This power unit is made to the fork lift market, consisting of very efficient gear pump, DC motor, guide raise and decrease valve, tank, ect. The up and down movement are controlled through the lever from the manual release valve, which is outfitted with an electric switch to activate the motor. The lowing pace is controlled from the stress compensated movement manage valve.
Distinctive Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
4. Oil changing is needed right after the first one hundred operation hrs, afterwards after each and every 3000 hours.
5. The power unit shown is made to be mounted horizontally.

Material Handling Energy UNIT two
Common Description
This power unit features power up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve with the reducing velocity managed by the strain compensated flow management valve. Goods of this series is usually extensively used in the industry of logistic products like fork lift, mini lift table, etc.
Distinctive Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned prior to mounting the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
4. Oil altering is required after the original 100 operation hours,afterwards after each 3000 hrs.
five. The energy unit really should be mounted horizontally.